Cable
1.37
End A
FME MALE
$2.00
End B
SO239 UHF Female
$3.00
1.37 — FME MALE to SO239 UHF Female
Custom 1.37 cable assembly with FME MALE and SO239 UHF Female connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $14.19 | |
| 6 ft | $15.79 |
Specs Summary
About This Assembly
1.37 Cable
1.37mm coaxial cable is a miniature 50-ohm cable slightly larger than 1.13mm, balancing compact size with improved power handling and lower signal loss. Used for internal antenna leads in smartphones, routers, and IoT devices where the 1.13mm cable would be too lossy but space constraints still prohibit larger coax.
FME Connector
FME (For Mobile Equipment) is a miniature threaded RF connector designed for mobile and vehicle-mounted antenna applications, particularly at GSM, CDMA, and FM frequencies. Its small size and robust threaded coupling make it common on vehicle-mount antenna mounts, cellular signal boosters, and mobile broadband modems.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This FME and UHF cable assembly is well suited for internal antenna leads in routers, smartphones, and compact IoT devices. The combination of reliable FME and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
1.37 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 7.8 dB | 0.078 dB |
| 450 MHz | 16.5 dB | 0.165 dB |
| 900 MHz | 24 dB | 0.24 dB |
| 1.8 GHz | 35 dB | 0.35 dB |
| 2.4 GHz | 41 dB | 0.41 dB |
| 5.8 GHz | 67 dB | 0.67 dB |
Frequently Asked Questions
What is 1.37 coaxial cable used for?
1.37mm coaxial cable is a miniature 50-ohm cable slightly larger than 1.13mm, balancing compact size with improved power handling and lower signal loss. Used for internal antenna leads in smartphones, routers, and IoT devices where the 1.13mm cable would be too lossy but space constraints still prohibit larger coax.
What is the signal loss of 1.37?
At 1800 MHz, 1.37 has approximately 35 dB of loss per 100 ft (0.35 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
What is a FME connector?
FME (For Mobile Equipment) is a miniature threaded RF connector designed for mobile and vehicle-mounted antenna applications, particularly at GSM, CDMA, and FM frequencies. Its small size and robust threaded coupling make it common on vehicle-mount antenna mounts, cellular signal boosters, and mobile broadband modems.
