Cable
LMR600 ULTRA FLEX Times
End A
N FEMALE
End B
N MALE
Specs Summary
500 ft LMR600 ULTRA FLEX Times — N FEMALE to N MALE
LMR600 ULTRA FLEX Times cable assembly, 500 feet, with N FEMALE and N MALE connectors. Hand-assembled, tested, and ships free within the US.
500 ft — N FEMALE / N MALE
$3,171.99
Free shipping • In stock
Other lengths:
Signal Loss — 500 ft
Approximate insertion loss for this 500 ft LMR600 ULTRA FLEX Times assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 500 ft |
|---|---|---|
| 100 MHz | 1.1 dB | 5.5 dB |
| 450 MHz | 2.2 dB | 11 dB |
| 900 MHz | 3.2 dB | 16 dB |
| 1.8 GHz | 4.6 dB | 23 dB |
| 2.4 GHz | 5.4 dB | 27 dB |
| 5.8 GHz | 8.8 dB | 44 dB |
About This Assembly
LMR600 ULTRA FLEX Times Cable
LMR-600-UltraFlex provides the ultra-low-loss performance of LMR-600 in a more flexible form factor, enabling easier routing around obstacles and through conduit without specialized bending tools. Specified for cell tower jumpers, rooftop DAS assemblies, and high-demand installations where the stiffness of standard LMR-600 would complicate routing.
N Connector
Type N is a threaded RF connector rated from DC to 18 GHz with a durable weatherproof design, making it the preferred interface for outdoor antenna installations, cellular base stations, and commercial wireless infrastructure. Its larger size compared to SMA allows higher power handling and the threaded coupling resists vibration, making it suitable for mobile and fixed outdoor applications.
Common Applications
This N cable assembly is well suited for cell tower jumpers, rooftop DAS assemblies, and long high-power feedlines. The combination of reliable N connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 500 ft?
Yes. This page is for the 500 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 500 ft cable?
At 1800 MHz, LMR600 ULTRA FLEX Times loses approximately 4.6 dB per 100 ft. This 500 ft assembly will have roughly 23 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 6 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both N FEMALE and N MALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
