Cable
LMR600 ULTRA FLEX Times
End A
N FEMALE
End B
PL259 UHF Male
Specs Summary
25 ft LMR600 ULTRA FLEX Times — N FEMALE to PL259 UHF Male
LMR600 ULTRA FLEX Times cable assembly, 25 feet, with N FEMALE and PL259 UHF Male connectors. Hand-assembled, tested, and ships free within the US.
25 ft — N FEMALE / PL259 UHF Male
$205.24
Free shipping • In stock
Other lengths:
Signal Loss — 25 ft
Approximate insertion loss for this 25 ft LMR600 ULTRA FLEX Times assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 25 ft |
|---|---|---|
| 100 MHz | 1.1 dB | 0.28 dB |
| 450 MHz | 2.2 dB | 0.55 dB |
| 900 MHz | 3.2 dB | 0.8 dB |
| 1.8 GHz | 4.6 dB | 1.15 dB |
| 2.4 GHz | 5.4 dB | 1.35 dB |
| 5.8 GHz | 8.8 dB | 2.2 dB |
About This Assembly
LMR600 ULTRA FLEX Times Cable
LMR-600-UltraFlex provides the ultra-low-loss performance of LMR-600 in a more flexible form factor, enabling easier routing around obstacles and through conduit without specialized bending tools. Specified for cell tower jumpers, rooftop DAS assemblies, and high-demand installations where the stiffness of standard LMR-600 would complicate routing.
N Connector
Type N is a threaded RF connector rated from DC to 18 GHz with a durable weatherproof design, making it the preferred interface for outdoor antenna installations, cellular base stations, and commercial wireless infrastructure. Its larger size compared to SMA allows higher power handling and the threaded coupling resists vibration, making it suitable for mobile and fixed outdoor applications.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This N and UHF cable assembly is well suited for cell tower jumpers, rooftop DAS assemblies, and long high-power feedlines. The combination of reliable N and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 25 ft?
Yes. This page is for the 25 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 25 ft cable?
At 1800 MHz, LMR600 ULTRA FLEX Times loses approximately 4.6 dB per 100 ft. This 25 ft assembly will have roughly 1.15 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 300 MHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both N FEMALE and PL259 UHF Male connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
