LMR600 ULTRA FLEX Times cable

Cable

LMR600 ULTRA FLEX Times

PL259 UHF Male

End A

PL259 UHF Male

SO239 UHF Female

End B

SO239 UHF Female

Specs Summary

CableLMR600 ULTRA FLEX Times
Diameter.600 INCH
Impedance50 Ohm
FrequencyDC – 300 MHz
Length1 ft
Velocity Factor86%
PL259 UHF Male InterfaceUHF threaded (PL-259 / SO-239)
SO239 UHF Female InterfaceUHF threaded (PL-259 / SO-239)
50 Ohm DC – 300 MHz

1 ft LMR600 ULTRA FLEX Times — PL259 UHF Male to SO239 UHF Female

LMR600 ULTRA FLEX Times cable assembly, 1 feet, with PL259 UHF Male and SO239 UHF Female connectors. Hand-assembled, tested, and ships free within the US.

1 ft — PL259 UHF Male / SO239 UHF Female

$38.98

Free shipping • In stock

Need a different length? Use the Cable Builder

Signal Loss — 1 ft

Approximate insertion loss for this 1 ft LMR600 ULTRA FLEX Times assembly at common RF frequencies.

Frequency Loss / 100 ft Loss — 1 ft
100 MHz 1.1 dB 0.01 dB
450 MHz 2.2 dB 0.02 dB
900 MHz 3.2 dB 0.03 dB
1.8 GHz 4.6 dB 0.05 dB
2.4 GHz 5.4 dB 0.05 dB
5.8 GHz 8.8 dB 0.09 dB

About This Assembly

LMR600 ULTRA FLEX Times Cable

LMR-600-UltraFlex provides the ultra-low-loss performance of LMR-600 in a more flexible form factor, enabling easier routing around obstacles and through conduit without specialized bending tools. Specified for cell tower jumpers, rooftop DAS assemblies, and high-demand installations where the stiffness of standard LMR-600 would complicate routing.

UHF Connector

The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.

Common Applications

This UHF cable assembly is well suited for cell tower jumpers, rooftop DAS assemblies, and long high-power feedlines. The combination of reliable UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.

Frequently Asked Questions

Is this cable hand-assembled in the USA?

Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.

Can I order a different length than 1 ft?

Yes. This page is for the 1 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.

How much signal loss will I see with this 1 ft cable?

At 1800 MHz, LMR600 ULTRA FLEX Times loses approximately 4.6 dB per 100 ft. This 1 ft assembly will have roughly 0.05 dB of insertion loss at that frequency. See the signal loss table for all frequency points.

What is the maximum frequency for this assembly?

This assembly is rated DC – 300 MHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both PL259 UHF Male and SO239 UHF Female connectors must be within spec at your target frequency.

What is your return policy?

We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.

Other LMR600 ULTRA FLEX Times Configurations