LMR600 Times — N FEMALE to PL259 UHF Male
Cable
LMR600 Times
End A
N FEMALE
$1.50
End B
PL259 UHF Male
$3.00
Specs Summary
LMR600 Times — N FEMALE to PL259 UHF Male
Made in USA
Assembled and tested in-house
Free Shipping
Fast, reliable delivery
Tested & Verified
Every cable tested before shipping
Easy Returns
30-day hassle-free returns
Need help choosing a cable?
Our RF experts are here to help you get the right fit.
Call an RF expert
1-661-200-0771
Email us
sales@wifiexpert.us
Need a custom cable?
Build your exact cable in seconds using our Cable Builder.
About This Assembly
Specs Summary
LMR600 Times Cable
LMR-600 is a Times Microwave ultra-low-loss 50-ohm coaxial cable with a 0.600" outer diameter, designed for demanding long-run installations where signal loss must be minimized. Supporting frequencies up to 5.8 GHz, it is the first choice for tower-to-radio runs exceeding 100 feet, distributed antenna systems (DAS), and high-power broadcast feedlines.
N Connector
Type N is a threaded RF connector rated from DC to 18 GHz with a durable weatherproof design, making it the preferred interface for outdoor antenna installations, cellular base stations, and commercial wireless infrastructure. Its larger size compared to SMA allows higher power handling and the threaded coupling resists vibration, making it suitable for mobile and fixed outdoor applications.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This N and UHF cable assembly is well suited for tower-to-radio feedlines, distributed antenna systems (DAS), and high-power broadcast runs. The combination of reliable N and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
LMR600 Times Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 1 dB | 0.01 dB |
| 450 MHz | 2.1 dB | 0.021 dB |
| 900 MHz | 3 dB | 0.03 dB |
| 1.8 GHz | 4.4 dB | 0.044 dB |
| 2.4 GHz | 5.1 dB | 0.051 dB |
| 5.8 GHz | 8.4 dB | 0.084 dB |
Frequently Asked Questions
What is LMR600 Times coaxial cable used for?
LMR-600 is a Times Microwave ultra-low-loss 50-ohm coaxial cable with a 0.600" outer diameter, designed for demanding long-run installations where signal loss must be minimized. Supporting frequencies up to 5.8 GHz, it is the first choice for tower-to-radio runs exceeding 100 feet, distributed antenna systems (DAS), and high-power broadcast feedlines.
What is the signal loss of LMR600 Times?
At 1800 MHz, LMR600 Times has approximately 4.4 dB of loss per 100 ft (0.044 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
What is a N connector?
Type N is a threaded RF connector rated from DC to 18 GHz with a durable weatherproof design, making it the preferred interface for outdoor antenna installations, cellular base stations, and commercial wireless infrastructure. Its larger size compared to SMA allows higher power handling and the threaded coupling resists vibration, making it suitable for mobile and fixed outdoor applications.
