Cable
RFC100A
End A
PL259 UHF Male
$3.00
End B
PL259 UHF Male
$3.00
RFC100A — PL259 UHF Male to PL259 UHF Male
Custom RFC100A cable assembly with PL259 UHF Male and PL259 UHF Male connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $17.98 | |
| 6 ft | $22.48 | |
| 25 ft | $39.58 | |
| 50 ft | $62.08 | |
| 100 ft | $107.08 |
Specs Summary
About This Assembly
RFC100A Cable
RFC-100A is a cost-effective thin 50-ohm coaxial cable equivalent in size to LMR-100A, offering solid performance for short internal connections and pigtails at a lower price point. A practical choice for budget-conscious builds where cable runs are under 10 feet, such as WiFi module connections, GPS pigtails, and compact RF assemblies.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This UHF cable assembly is well suited for short pigtails and budget compact RF device connections. The combination of reliable UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RFC100A Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 5.3 dB | 0.053 dB |
| 450 MHz | 11.5 dB | 0.115 dB |
| 900 MHz | 16.5 dB | 0.165 dB |
| 1.8 GHz | 24.5 dB | 0.245 dB |
| 2.4 GHz | 29 dB | 0.29 dB |
| 5.8 GHz | 49 dB | 0.49 dB |
Frequently Asked Questions
What is RFC100A coaxial cable used for?
RFC-100A is a cost-effective thin 50-ohm coaxial cable equivalent in size to LMR-100A, offering solid performance for short internal connections and pigtails at a lower price point. A practical choice for budget-conscious builds where cable runs are under 10 feet, such as WiFi module connections, GPS pigtails, and compact RF assemblies.
What is the signal loss of RFC100A?
At 1800 MHz, RFC100A has approximately 24.5 dB of loss per 100 ft (0.245 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
