Cable
RFC240 ULTRA FLEX
End A
BNC MALE
End B
TNC MALE
Specs Summary
250 ft RFC240 ULTRA FLEX — BNC MALE to TNC MALE
RFC240 ULTRA FLEX cable assembly, 250 feet, with BNC MALE and TNC MALE connectors. Hand-assembled, tested, and ships free within the US.
250 ft — BNC MALE / TNC MALE
$467.08
Free shipping • In stock
Other lengths:
Signal Loss — 250 ft
Approximate insertion loss for this 250 ft RFC240 ULTRA FLEX assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 250 ft |
|---|---|---|
| 100 MHz | 2.6 dB | 6.5 dB |
| 450 MHz | 5.6 dB | 14 dB |
| 900 MHz | 8.1 dB | 20.25 dB |
| 1.8 GHz | 11.7 dB | 29.25 dB |
| 2.4 GHz | 13.6 dB | 34 dB |
| 5.8 GHz | 22.5 dB | 56.25 dB |
About This Assembly
RFC240 ULTRA FLEX Cable
RFC-240-UltraFlex is the flexible version of RFC-240, combining low-loss 0.240" performance with improved bendability for easier installation. Ideal for mobile radio setups, vehicle antenna mounts, and congested equipment areas where a rigid cable would be impractical.
BNC Connector
BNC (Bayonet Neill–Concelman) is a quick-connect RF connector featuring a bayonet locking mechanism for fast mating and unmating, rated from DC to 4 GHz. Its ease of use makes it standard in test and measurement equipment, video distribution, two-way radio accessories, and laboratory bench setups where cables are frequently connected and disconnected.
TNC Connector
TNC (Threaded Neill–Concelman) is the threaded version of BNC, offering improved performance up to 11 GHz and better vibration resistance through its screw coupling. It is commonly used in mobile radio antennas, avionics, and outdoor installations where BNC's bayonet lock would not provide sufficient mechanical security.
Common Applications
This BNC and TNC cable assembly is well suited for mobile radio setups and flexible medium-length antenna connections. The combination of reliable BNC and TNC connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 250 ft?
Yes. This page is for the 250 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 250 ft cable?
At 1800 MHz, RFC240 ULTRA FLEX loses approximately 11.7 dB per 100 ft. This 250 ft assembly will have roughly 29.25 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 4 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both BNC MALE and TNC MALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
