Cable
RFC240
End A
SMA FEMALE
End B
SMA FEMALE
Specs Summary
1 ft RFC240 — SMA FEMALE to SMA FEMALE
RFC240 cable assembly, 1 feet, with SMA FEMALE and SMA FEMALE connectors. Hand-assembled, tested, and ships free within the US.
1 ft — SMA FEMALE / SMA FEMALE
$16.98
Free shipping • In stock
Other lengths:
Signal Loss — 1 ft
Approximate insertion loss for this 1 ft RFC240 assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 1 ft |
|---|---|---|
| 100 MHz | 2.5 dB | 0.03 dB |
| 450 MHz | 5.4 dB | 0.05 dB |
| 900 MHz | 7.8 dB | 0.08 dB |
| 1.8 GHz | 11.3 dB | 0.11 dB |
| 2.4 GHz | 13.1 dB | 0.13 dB |
| 5.8 GHz | 21.5 dB | 0.22 dB |
About This Assembly
RFC240 Cable
RFC-240 is a 0.240" 50-ohm low-loss coaxial cable delivering performance comparable to LMR-240 at a more accessible price, making it popular for installers who need reliable medium-distance cable runs. Well suited for cellular repeater installations, point-to-point wireless links, and access point feedlines up to 75 feet.
SMA Connector
SMA (SubMiniature version A) is the most widely used RF connector in the industry, offering a threaded interface that provides a secure, low-reflection connection from DC to 18 GHz. Its compact size, 50-ohm impedance, and broad frequency range make it the default choice for WiFi equipment, software-defined radios, cellular antennas, GPS receivers, and RF test instruments.
Common Applications
This SMA cable assembly is well suited for medium-length cellular and WiFi antenna runs at a value price point. The combination of reliable SMA connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 1 ft?
Yes. This page is for the 1 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 1 ft cable?
At 1800 MHz, RFC240 loses approximately 11.3 dB per 100 ft. This 1 ft assembly will have roughly 0.11 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 6 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both SMA FEMALE and SMA FEMALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
