Cable
RFC600
End A
N FEMALE
End B
N FEMALE
Specs Summary
50 ft RFC600 — N FEMALE to N FEMALE
RFC600 cable assembly, 50 feet, with N FEMALE and N FEMALE connectors. Hand-assembled, tested, and ships free within the US.
50 ft — N FEMALE / N FEMALE
$118.99
Free shipping • In stock
Other lengths:
Signal Loss — 50 ft
Approximate insertion loss for this 50 ft RFC600 assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 50 ft |
|---|---|---|
| 100 MHz | 1 dB | 0.5 dB |
| 450 MHz | 2.2 dB | 1.1 dB |
| 900 MHz | 3.1 dB | 1.55 dB |
| 1.8 GHz | 4.5 dB | 2.25 dB |
| 2.4 GHz | 5.2 dB | 2.6 dB |
| 5.8 GHz | 8.6 dB | 4.3 dB |
About This Assembly
RFC600 Cable
RFC-600 is a budget-friendly 0.600" ultra-low-loss 50-ohm coaxial cable designed for very long feedline runs where performance is critical but LMR-600 pricing is a constraint. A practical choice for large outdoor antenna installations, long building penetrations, and cost-sensitive DAS projects requiring minimal signal loss.
N Connector
Type N is a threaded RF connector rated from DC to 18 GHz with a durable weatherproof design, making it the preferred interface for outdoor antenna installations, cellular base stations, and commercial wireless infrastructure. Its larger size compared to SMA allows higher power handling and the threaded coupling resists vibration, making it suitable for mobile and fixed outdoor applications.
Common Applications
This N cable assembly is well suited for long feedlines in cost-sensitive DAS and commercial antenna projects. The combination of reliable N connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 50 ft?
Yes. This page is for the 50 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 50 ft cable?
At 1800 MHz, RFC600 loses approximately 4.5 dB per 100 ft. This 50 ft assembly will have roughly 2.25 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 6 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both N FEMALE and N FEMALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
