RG174 cable

Cable

RG174

BNC FEMALE

End A

BNC FEMALE

SO239 UHF Female

End B

SO239 UHF Female

Specs Summary

CableRG174
Diameter.1 INCH
Impedance50 Ohm
FrequencyDC – 300 MHz
Length25 ft
Velocity Factor66%
BNC FEMALE InterfaceBNC bayonet (MIL-STD-348)
SO239 UHF Female InterfaceUHF threaded (PL-259 / SO-239)
50 Ohm DC – 300 MHz

25 ft RG174 — BNC FEMALE to SO239 UHF Female

RG174 cable assembly, 25 feet, with BNC FEMALE and SO239 UHF Female connectors. Hand-assembled, tested, and ships free within the US.

25 ft — BNC FEMALE / SO239 UHF Female

$33.98

Free shipping • In stock

Need a different length? Use the Cable Builder

Signal Loss — 25 ft

Approximate insertion loss for this 25 ft RG174 assembly at common RF frequencies.

Frequency Loss / 100 ft Loss — 25 ft
100 MHz 6.6 dB 1.65 dB
450 MHz 14.5 dB 3.62 dB
900 MHz 21.5 dB 5.38 dB
1.8 GHz 32 dB 8 dB
2.4 GHz 38 dB 9.5 dB
5.8 GHz 65 dB 16.25 dB

About This Assembly

RG174 Cable

RG-174 is an ultra-thin, highly flexible 50-ohm coaxial cable with a 0.100" outer diameter — one of the smallest coax types available. Its stranded center conductor and single-braid shield make it ideal for tight internal wiring where space is at a premium. Typical uses include GPS antenna pigtails, WiFi module connections, and short adapter leads inside enclosures.

BNC Connector

BNC (Bayonet Neill–Concelman) is a quick-connect RF connector featuring a bayonet locking mechanism for fast mating and unmating, rated from DC to 4 GHz. Its ease of use makes it standard in test and measurement equipment, video distribution, two-way radio accessories, and laboratory bench setups where cables are frequently connected and disconnected.

UHF Connector

The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.

Common Applications

This BNC and UHF cable assembly is well suited for GPS and WiFi module pigtails, short flexible adapter leads, and internal device wiring. The combination of reliable BNC and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.

Frequently Asked Questions

Is this cable hand-assembled in the USA?

Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.

Can I order a different length than 25 ft?

Yes. This page is for the 25 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.

How much signal loss will I see with this 25 ft cable?

At 1800 MHz, RG174 loses approximately 32 dB per 100 ft. This 25 ft assembly will have roughly 8 dB of insertion loss at that frequency. See the signal loss table for all frequency points.

What is the maximum frequency for this assembly?

This assembly is rated DC – 300 MHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both BNC FEMALE and SO239 UHF Female connectors must be within spec at your target frequency.

What is your return policy?

We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.

Other RG174 Configurations