RG178 cable

Cable

RG178

PL259 UHF Male

End A

PL259 UHF Male

PL259 UHF Male

End B

PL259 UHF Male

Specs Summary

CableRG178
Diameter1.75MM
Impedance50 Ohm
FrequencyDC – 300 MHz
Length25 ft
Velocity Factor69%
PL259 UHF Male InterfaceUHF threaded (PL-259 / SO-239)
PL259 UHF Male InterfaceUHF threaded (PL-259 / SO-239)
50 Ohm DC – 300 MHz

25 ft RG178 — PL259 UHF Male to PL259 UHF Male

RG178 cable assembly, 25 feet, with PL259 UHF Male and PL259 UHF Male connectors. Hand-assembled, tested, and ships free within the US.

25 ft — PL259 UHF Male / PL259 UHF Male

$27.98

Free shipping • In stock

Need a different length? Use the Cable Builder

Signal Loss — 25 ft

Approximate insertion loss for this 25 ft RG178 assembly at common RF frequencies.

Frequency Loss / 100 ft Loss — 25 ft
100 MHz 7.5 dB 1.88 dB
450 MHz 16.5 dB 4.13 dB
900 MHz 24 dB 6 dB
1.8 GHz 35 dB 8.75 dB
2.4 GHz 42 dB 10.5 dB
5.8 GHz 70 dB 17.5 dB

About This Assembly

RG178 Cable

RG-178 is an extremely thin 50-ohm coaxial cable measuring just 1.75mm in diameter, designed for space-constrained RF assemblies. Its PTFE dielectric and silver-plated conductors deliver reliable performance from DC up to several GHz. Commonly used for internal wiring in test equipment, medical devices, and cellular module pigtails.

UHF Connector

The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.

Common Applications

This UHF cable assembly is well suited for ultra-compact internal wiring in test equipment and small wireless modules. The combination of reliable UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.

Frequently Asked Questions

Is this cable hand-assembled in the USA?

Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.

Can I order a different length than 25 ft?

Yes. This page is for the 25 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.

How much signal loss will I see with this 25 ft cable?

At 1800 MHz, RG178 loses approximately 35 dB per 100 ft. This 25 ft assembly will have roughly 8.75 dB of insertion loss at that frequency. See the signal loss table for all frequency points.

What is the maximum frequency for this assembly?

This assembly is rated DC – 300 MHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both PL259 UHF Male and PL259 UHF Male connectors must be within spec at your target frequency.

What is your return policy?

We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.

Other RG178 Configurations