DVB Pal Female Angle connector

Specifications

Interface Type IEC 169-2 / Belling-Lee
Impedance 75 Ohm
Frequency Range DC – 2 GHz
VSWR 1.15:1 typ. at 800 MHz
Insertion Loss 0.10 dB typ.
Contact Resistance ≤5 mΩ
Dielectric Withstand 500 VRMS
Mating Cycles 500 cycles
Body Material Brass, nickel plated
Contact Material Brass, nickel plated

DVB Pal Female Angle Connector

DVB-T / PAL Family

The PAL connector (also called IEC 169-2 or Belling-Lee) is the standard RF antenna connector used for terrestrial and cable television in Europe, Australia, and many other regions. Its simple push-in design mates with the coaxial socket found on virtually every TV, DVB-T tuner, and set-top box sold outside North America.

Typical Applications

RF cable assemblies, antenna connections, test equipment patching, and field installations.

Gender & Polarity Note

This is a Female connector — it has a socket that accepts a male center pin. Female connectors are commonly used as panel-mount chassis connectors and bulkhead adapters.

Frequently Asked Questions

What frequency range does the DVB Pal Female Angle connector support?

DVB-T / PAL connectors are rated DC – 2 GHz. The effective upper frequency of a cable assembly is limited by the lowest-rated component — either the cable or the connector. Always verify both are within spec for your target frequency.

How many times can a DVB-T / PAL connector be mated and unmated?

DVB Pal Female Angle connectors are rated for approximately 500 mating cycles. Exceeding this can cause wear on the contact surfaces, increasing insertion loss and VSWR. For applications with very frequent connects and disconnects, consider a connector rated for higher cycle counts.

What torque should I use to tighten a DVB-T / PAL connector?

Use a torque wrench and follow the connector manufacturer's recommended torque specification. Hand-tight plus a quarter turn is a safe starting point for most push-on connectors.

Are the DVB-T / PAL connectors on CoaxRF assemblies weatherproof?

Our standard cable assemblies use high-quality connectors suitable for most indoor and sheltered outdoor applications. For fully weatherproof outdoor installations, we recommend applying self-amalgamating tape over the connector junction to prevent moisture ingress.

Do CoaxRF cables with DVB Pal Female Angle connectors ship assembled and tested?

Yes. Every cable assembly — including those terminated with DVB Pal Female Angle connectors — is hand-assembled and continuity tested before shipping. Cables ship free within the US from our US facility.