Specifications
FME FEMALE Connector
FME Family
FME (For Mobile Equipment) is a miniature threaded RF connector designed for mobile and vehicle-mounted antenna applications, particularly at GSM, CDMA, and FM frequencies. Its small size and robust threaded coupling make it common on vehicle-mount antenna mounts, cellular signal boosters, and mobile broadband modems.
Typical Applications
RF cable assemblies, antenna connections, test equipment patching, and field installations.
Gender & Polarity Note
Check the product datasheet for gender and polarity details. RF connectors are available in male (pin), female (socket), and reverse-polarity (RP) variants.
Cables Available with FME FEMALE
Select a cable type to see all connector pairings and pricing.
1.13
1.13MM • DC – 6 GHz
RG178
1.75MM • DC – 3 GHz
RG174
.1 INCH • DC – 3 GHz
RG316
.1 INCH • DC – 6 GHz
RFC100A
.1 INCH • DC – 6 GHz
RFC195
.195 INCH • DC – 6 GHz
RG58
.195 INCH • DC – 1 GHz
LMR195 Times
.195 INCH • DC – 6 GHz
RG142
.195 INCH • DC – 6 GHz
RG400
.195 INCH • DC – 6 GHz
RG316DS
.1 INCH • DC – 6 GHz
LMR100 Times
.1 INCH • DC – 6 GHz
1.37
1.37MM • DC – 6 GHz
RGU178
.06 INCH • DC – 6 GHz
Frequently Asked Questions
What frequency range does the FME FEMALE connector support?
FME connectors are rated DC – 2 GHz. The effective upper frequency of a cable assembly is limited by the lowest-rated component — either the cable or the connector. Always verify both are within spec for your target frequency.
How many times can a FME connector be mated and unmated?
FME FEMALE connectors are rated for approximately 500 mating cycles. Exceeding this can cause wear on the contact surfaces, increasing insertion loss and VSWR. For applications with very frequent connects and disconnects, consider a connector rated for higher cycle counts.
What torque should I use to tighten a FME connector?
Use a torque wrench and follow the connector manufacturer's recommended torque specification. Hand-tight plus a quarter turn is a safe starting point for most push-on connectors.
Are the FME connectors on CoaxRF assemblies weatherproof?
Our standard cable assemblies use high-quality connectors suitable for most indoor and sheltered outdoor applications. For fully weatherproof outdoor installations, we recommend applying self-amalgamating tape over the connector junction to prevent moisture ingress.
Do CoaxRF cables with FME FEMALE connectors ship assembled and tested?
Yes. Every cable assembly — including those terminated with FME FEMALE connectors — is hand-assembled and continuity tested before shipping. Cables ship free within the US from our US facility.