MCX FEMALE connector

Specifications

Interface Type MCX snap-on (CECC 22220)
Impedance 50 Ohm
Frequency Range DC – 6 GHz
VSWR 1.10:1 typ. at 3 GHz
Insertion Loss 0.10 dB typ.
Contact Resistance ≤3 mΩ
Dielectric Withstand 500 VRMS
Mating Cycles 500 cycles
Body Material Brass, gold plated
Contact Material Beryllium copper, gold plated

MCX FEMALE Connector

MCX Family

MCX (Micro Coaxial) is a snap-on RF connector approximately 30% smaller than SMB, designed for compact equipment requiring frequent connections in a small footprint. Rated to 6 GHz, MCX is commonly used in GPS receivers, automotive telematics modules, handheld communication devices, and compact measurement instruments.

Typical Applications

GPS receivers, automotive telematics, handheld communication devices, compact test instruments.

Gender & Polarity Note

Check the product datasheet for gender and polarity details. RF connectors are available in male (pin), female (socket), and reverse-polarity (RP) variants.

Frequently Asked Questions

What frequency range does the MCX FEMALE connector support?

MCX connectors are rated DC – 6 GHz. The effective upper frequency of a cable assembly is limited by the lowest-rated component — either the cable or the connector. Always verify both are within spec for your target frequency.

How many times can a MCX connector be mated and unmated?

MCX FEMALE connectors are rated for approximately 500 mating cycles. Exceeding this can cause wear on the contact surfaces, increasing insertion loss and VSWR. For applications with very frequent connects and disconnects, consider a connector rated for higher cycle counts.

What torque should I use to tighten a MCX connector?

Use a torque wrench and follow the connector manufacturer's recommended torque specification. Hand-tight plus a quarter turn is a safe starting point for most push-on connectors.

Are the MCX connectors on CoaxRF assemblies weatherproof?

Our standard cable assemblies use high-quality connectors suitable for most indoor and sheltered outdoor applications. For fully weatherproof outdoor installations, we recommend applying self-amalgamating tape over the connector junction to prevent moisture ingress.

Do CoaxRF cables with MCX FEMALE connectors ship assembled and tested?

Yes. Every cable assembly — including those terminated with MCX FEMALE connectors — is hand-assembled and continuity tested before shipping. Cables ship free within the US from our US facility.