MINI UHF MALE connector

Specifications

Interface Type Mini UHF threaded
Impedance 50 Ohm
Frequency Range DC – 2.5 GHz
VSWR 1.10:1 typ. at 1 GHz
Insertion Loss 0.10 dB typ.
Contact Resistance ≤3 mΩ
Dielectric Withstand 500 VRMS
Mating Cycles 500 cycles
Body Material Brass, nickel plated
Contact Material Brass, gold plated

MINI UHF MALE Connector

Mini UHF Family

Mini UHF is a compact version of the UHF/PL-259 connector, approximately half the size of the standard UHF connector, designed for handheld radios and mobile antennas where space is limited. It maintains compatibility with UHF-band signal frequencies and is commonly used on handheld transceivers, mobile radio antennas, and compact base station equipment.

Typical Applications

RF cable assemblies, antenna connections, test equipment patching, and field installations.

Gender & Polarity Note

Check the product datasheet for gender and polarity details. RF connectors are available in male (pin), female (socket), and reverse-polarity (RP) variants.

Frequently Asked Questions

What frequency range does the MINI UHF MALE connector support?

Mini UHF connectors are rated DC – 2.5 GHz. The effective upper frequency of a cable assembly is limited by the lowest-rated component — either the cable or the connector. Always verify both are within spec for your target frequency.

How many times can a Mini UHF connector be mated and unmated?

MINI UHF MALE connectors are rated for approximately 500 mating cycles. Exceeding this can cause wear on the contact surfaces, increasing insertion loss and VSWR. For applications with very frequent connects and disconnects, consider a connector rated for higher cycle counts.

What torque should I use to tighten a Mini UHF connector?

Use a torque wrench and follow the connector manufacturer's recommended torque specification. Hand-tight plus a quarter turn is a safe starting point for most push-on connectors.

Are the Mini UHF connectors on CoaxRF assemblies weatherproof?

Our standard cable assemblies use high-quality connectors suitable for most indoor and sheltered outdoor applications. For fully weatherproof outdoor installations, we recommend applying self-amalgamating tape over the connector junction to prevent moisture ingress.

Do CoaxRF cables with MINI UHF MALE connectors ship assembled and tested?

Yes. Every cable assembly — including those terminated with MINI UHF MALE connectors — is hand-assembled and continuity tested before shipping. Cables ship free within the US from our US facility.