1.13 — RP-TNC MALE to RP-TNC MALE
Custom low loss 1.13 RF coaxial cable assembly with RP-TNC MALE and RP-TNC MALE connectors.
Cable
1.13
End A
RP-TNC MALE
End B
RP-TNC MALE
Specs Summary
Made in USA
Assembled and tested in-house
Free Shipping
Fast, reliable delivery
Tested & Verified
Every cable tested before shipping
Easy Returns
30-day hassle-free returns
Need help choosing a cable?
Our RF experts are here to help you get the right fit.
Call an RF expert
1-661-200-0771
Email us
sales@wifiexpert.us
Need a custom cable?
Build your exact cable in seconds using our Cable Builder.
About This Assembly
Specs Summary
1.13 Cable
1.13mm coaxial cable is an ultra-miniature 50-ohm cable used primarily for internal RF wiring in compact wireless devices such as laptops, tablets, and embedded modules. Its extremely small 1.13mm outer diameter allows it to pass through tight spaces inside consumer electronics, connecting antennas to WiFi or cellular modules with minimal signal loss over short distances.
RP-TNC Connector
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
Common Applications
This RP-TNC cable assembly is well suited for internal WiFi and cellular module antenna connections in laptops and tablets. The combination of reliable RP-TNC connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
1.13 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 8.5 dB | 0.085 dB |
| 450 MHz | 18 dB | 0.18 dB |
| 900 MHz | 26 dB | 0.26 dB |
| 1.8 GHz | 38 dB | 0.38 dB |
| 2.4 GHz | 44 dB | 0.44 dB |
| 5.8 GHz | 72 dB | 0.72 dB |
Frequently Asked Questions
What is 1.13 coaxial cable used for?
1.13mm coaxial cable is an ultra-miniature 50-ohm cable used primarily for internal RF wiring in compact wireless devices such as laptops, tablets, and embedded modules. Its extremely small 1.13mm outer diameter allows it to pass through tight spaces inside consumer electronics, connecting antennas to WiFi or cellular modules with minimal signal loss over short distances.
What is the signal loss of 1.13?
At 1800 MHz, 1.13 has approximately 38 dB of loss per 100 ft (0.38 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 6 GHz, limited by the lowest-rated component across the cable and connectors.
