Cable
1.37
End A
SMA FEMALE ANGLE
$1.50
End B
SMA MALE
$1.00
1.37 — SMA FEMALE ANGLE to SMA MALE
Custom 1.37 cable assembly with SMA FEMALE ANGLE and SMA MALE connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $11.37 | |
| 6 ft | $12.82 |
Specs Summary
About This Assembly
1.37 Cable
1.37mm coaxial cable is a miniature 50-ohm cable slightly larger than 1.13mm, balancing compact size with improved power handling and lower signal loss. Used for internal antenna leads in smartphones, routers, and IoT devices where the 1.13mm cable would be too lossy but space constraints still prohibit larger coax.
SMA Connector
SMA (SubMiniature version A) is the most widely used RF connector in the industry, offering a threaded interface that provides a secure, low-reflection connection from DC to 18 GHz. Its compact size, 50-ohm impedance, and broad frequency range make it the default choice for WiFi equipment, software-defined radios, cellular antennas, GPS receivers, and RF test instruments.
Common Applications
This SMA cable assembly is well suited for internal antenna leads in routers, smartphones, and compact IoT devices. The combination of reliable SMA connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
1.37 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 7.8 dB | 0.078 dB |
| 450 MHz | 16.5 dB | 0.165 dB |
| 900 MHz | 24 dB | 0.24 dB |
| 1.8 GHz | 35 dB | 0.35 dB |
| 2.4 GHz | 41 dB | 0.41 dB |
| 5.8 GHz | 67 dB | 0.67 dB |
Frequently Asked Questions
What is 1.37 coaxial cable used for?
1.37mm coaxial cable is a miniature 50-ohm cable slightly larger than 1.13mm, balancing compact size with improved power handling and lower signal loss. Used for internal antenna leads in smartphones, routers, and IoT devices where the 1.13mm cable would be too lossy but space constraints still prohibit larger coax.
What is the signal loss of 1.37?
At 1800 MHz, 1.37 has approximately 35 dB of loss per 100 ft (0.35 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 6 GHz, limited by the lowest-rated component across the cable and connectors.
