RFC195 — BNC FEMALE to SO239 UHF Female
Cable
RFC195
End A
BNC FEMALE
$2.00
End B
SO239 UHF Female
$3.00
Specs Summary
RFC195 — BNC FEMALE to SO239 UHF Female
✓ In stock • Ships next business day
| Length | Price | |
|---|---|---|
| 1 ft | $17.28 | |
| 6 ft | $22.48 | |
| 25 ft | $42.24 | |
| 50 ft | $68.24 | |
| 100 ft | $120.24 | |
| 250 ft | $276.24 |
Made in USA
About This Assembly
RFC195 Cable
RFC-195 is a budget-friendly 50-ohm coaxial cable with a 0.195" outer diameter that provides good performance for short-to-medium runs at a lower price than LMR-195. Suitable for antenna jumpers, two-way radio leads, and WiFi access point connections up to 30 feet where cost efficiency is the primary consideration.
BNC Connector
BNC (Bayonet Neill–Concelman) is a quick-connect RF connector featuring a bayonet locking mechanism for fast mating and unmating, rated from DC to 4 GHz. Its ease of use makes it standard in test and measurement equipment, video distribution, two-way radio accessories, and laboratory bench setups where cables are frequently connected and disconnected.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This BNC and UHF cable assembly is well suited for short-to-medium antenna jumpers and budget wireless installations. The combination of reliable BNC and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RFC195 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 3.3 dB | 0.033 dB |
| 450 MHz | 7.2 dB | 0.072 dB |
| 900 MHz | 10.4 dB | 0.104 dB |
| 1.8 GHz | 15.1 dB | 0.151 dB |
| 2.4 GHz | 17.7 dB | 0.177 dB |
| 5.8 GHz | 29.4 dB | 0.294 dB |
Frequently Asked Questions
What is RFC195 coaxial cable used for?
RFC-195 is a budget-friendly 50-ohm coaxial cable with a 0.195" outer diameter that provides good performance for short-to-medium runs at a lower price than LMR-195. Suitable for antenna jumpers, two-way radio leads, and WiFi access point connections up to 30 feet where cost efficiency is the primary consideration.
What is the signal loss of RFC195?
At 1800 MHz, RFC195 has approximately 15.1 dB of loss per 100 ft (0.151 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
What is a BNC connector?
BNC (Bayonet Neill–Concelman) is a quick-connect RF connector featuring a bayonet locking mechanism for fast mating and unmating, rated from DC to 4 GHz. Its ease of use makes it standard in test and measurement equipment, video distribution, two-way radio accessories, and laboratory bench setups where cables are frequently connected and disconnected.
