Cable
RFC240
End A
RP-TNC MALE
End B
TNC MALE
Specs Summary
100 ft RFC240 — RP-TNC MALE to TNC MALE
RFC240 cable assembly, 100 feet, with RP-TNC MALE and TNC MALE connectors. Hand-assembled, tested, and ships free within the US.
100 ft — RP-TNC MALE / TNC MALE
$140.73
Free shipping • In stock
Other lengths:
Signal Loss — 100 ft
Approximate insertion loss for this 100 ft RFC240 assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 100 ft |
|---|---|---|
| 100 MHz | 2.5 dB | 2.5 dB |
| 450 MHz | 5.4 dB | 5.4 dB |
| 900 MHz | 7.8 dB | 7.8 dB |
| 1.8 GHz | 11.3 dB | 11.3 dB |
| 2.4 GHz | 13.1 dB | 13.1 dB |
| 5.8 GHz | 21.5 dB | 21.5 dB |
About This Assembly
RFC240 Cable
RFC-240 is a 0.240" 50-ohm low-loss coaxial cable delivering performance comparable to LMR-240 at a more accessible price, making it popular for installers who need reliable medium-distance cable runs. Well suited for cellular repeater installations, point-to-point wireless links, and access point feedlines up to 75 feet.
RP-TNC Connector
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
TNC Connector
TNC (Threaded Neill–Concelman) is the threaded version of BNC, offering improved performance up to 11 GHz and better vibration resistance through its screw coupling. It is commonly used in mobile radio antennas, avionics, and outdoor installations where BNC's bayonet lock would not provide sufficient mechanical security.
Common Applications
This RP-TNC and TNC cable assembly is well suited for medium-length cellular and WiFi antenna runs at a value price point. The combination of reliable RP-TNC and TNC connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 100 ft?
Yes. This page is for the 100 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 100 ft cable?
At 1800 MHz, RFC240 loses approximately 11.3 dB per 100 ft. This 100 ft assembly will have roughly 11.3 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 6 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both RP-TNC MALE and TNC MALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
