RG174 — DVB TV Pal Female to F MALE
Custom low loss RG174 RF coaxial cable assembly with DVB TV Pal Female and F MALE connectors.
Cable
RG174
End A
DVB TV Pal Female
End B
F MALE
Specs Summary
Made in USA
Assembled and tested in-house
Free Shipping
Fast, reliable delivery
Tested & Verified
Every cable tested before shipping
Easy Returns
30-day hassle-free returns
Need help choosing a cable?
Our RF experts are here to help you get the right fit.
Call an RF expert
1-661-200-0771
Email us
sales@wifiexpert.us
Need a custom cable?
Build your exact cable in seconds using our Cable Builder.
About This Assembly
Specs Summary
RG174 Cable
RG-174 is an ultra-thin, highly flexible 50-ohm coaxial cable with a 0.100" outer diameter — one of the smallest coax types available. Its stranded center conductor and single-braid shield make it ideal for tight internal wiring where space is at a premium. Typical uses include GPS antenna pigtails, WiFi module connections, and short adapter leads inside enclosures.
DVB-T / PAL Connector
The PAL connector (also called IEC 169-2 or Belling-Lee) is the standard RF antenna connector used for terrestrial and cable television in Europe, Australia, and many other regions. Its simple push-in design mates with the coaxial socket found on virtually every TV, DVB-T tuner, and set-top box sold outside North America.
F Connector
The F connector is a low-cost threaded coaxial connector used almost exclusively in cable TV, satellite, and over-the-air broadcast applications. It uses the center conductor of RG-6 or RG-59 cable as the pin, which simplifies termination and reduces cost. F connectors are found on cable modems, satellite receivers, TV tuners, and distribution amplifiers.
Common Applications
This DVB-T / PAL and F cable assembly is well suited for GPS and WiFi module pigtails, short flexible adapter leads, and internal device wiring. The combination of reliable DVB-T / PAL and F connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RG174 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 6.6 dB | 0.066 dB |
| 450 MHz | 14.5 dB | 0.145 dB |
| 900 MHz | 21.5 dB | 0.215 dB |
| 1.8 GHz | 32 dB | 0.32 dB |
| 2.4 GHz | 38 dB | 0.38 dB |
| 5.8 GHz | 65 dB | 0.65 dB |
Frequently Asked Questions
What is RG174 coaxial cable used for?
RG-174 is an ultra-thin, highly flexible 50-ohm coaxial cable with a 0.100" outer diameter — one of the smallest coax types available. Its stranded center conductor and single-braid shield make it ideal for tight internal wiring where space is at a premium. Typical uses include GPS antenna pigtails, WiFi module connections, and short adapter leads inside enclosures.
What is the signal loss of RG174?
At 1800 MHz, RG174 has approximately 32 dB of loss per 100 ft (0.32 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 2 GHz, limited by the lowest-rated component across the cable and connectors.
What is a DVB-T / PAL connector?
The PAL connector (also called IEC 169-2 or Belling-Lee) is the standard RF antenna connector used for terrestrial and cable television in Europe, Australia, and many other regions. Its simple push-in design mates with the coaxial socket found on virtually every TV, DVB-T tuner, and set-top box sold outside North America.
