RG174 — FME FEMALE to SO239 UHF Female
Cable
RG174
End A
FME FEMALE
$2.00
End B
SO239 UHF Female
$3.00
Specs Summary
RG174 — FME FEMALE to SO239 UHF Female
✓ In stock • Ships next business day
| Length | Price | |
|---|---|---|
| 1 ft | $15.48 | |
| 6 ft | $18.88 | |
| 25 ft | $31.80 | |
| 50 ft | $48.80 | |
| 100 ft | $82.80 |
Made in USA
About This Assembly
RG174 Cable
RG-174 is an ultra-thin, highly flexible 50-ohm coaxial cable with a 0.100" outer diameter — one of the smallest coax types available. Its stranded center conductor and single-braid shield make it ideal for tight internal wiring where space is at a premium. Typical uses include GPS antenna pigtails, WiFi module connections, and short adapter leads inside enclosures.
FME Connector
FME (For Mobile Equipment) is a miniature threaded RF connector designed for mobile and vehicle-mounted antenna applications, particularly at GSM, CDMA, and FM frequencies. Its small size and robust threaded coupling make it common on vehicle-mount antenna mounts, cellular signal boosters, and mobile broadband modems.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This FME and UHF cable assembly is well suited for GPS and WiFi module pigtails, short flexible adapter leads, and internal device wiring. The combination of reliable FME and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RG174 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 6.6 dB | 0.066 dB |
| 450 MHz | 14.5 dB | 0.145 dB |
| 900 MHz | 21.5 dB | 0.215 dB |
| 1.8 GHz | 32 dB | 0.32 dB |
| 2.4 GHz | 38 dB | 0.38 dB |
| 5.8 GHz | 65 dB | 0.65 dB |
Frequently Asked Questions
What is RG174 coaxial cable used for?
RG-174 is an ultra-thin, highly flexible 50-ohm coaxial cable with a 0.100" outer diameter — one of the smallest coax types available. Its stranded center conductor and single-braid shield make it ideal for tight internal wiring where space is at a premium. Typical uses include GPS antenna pigtails, WiFi module connections, and short adapter leads inside enclosures.
What is the signal loss of RG174?
At 1800 MHz, RG174 has approximately 32 dB of loss per 100 ft (0.32 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
What is a FME connector?
FME (For Mobile Equipment) is a miniature threaded RF connector designed for mobile and vehicle-mounted antenna applications, particularly at GSM, CDMA, and FM frequencies. Its small size and robust threaded coupling make it common on vehicle-mount antenna mounts, cellular signal boosters, and mobile broadband modems.
