Cable
RG316DS
End A
MCX MALE
End B
MCX MALE
Specs Summary
6 ft RG316DS — MCX MALE to MCX MALE
RG316DS cable assembly, 6 feet, with MCX MALE and MCX MALE connectors. Hand-assembled, tested, and ships free within the US.
6 ft — MCX MALE / MCX MALE
$19.93
Free shipping • In stock
Other lengths:
Signal Loss — 6 ft
Approximate insertion loss for this 6 ft RG316DS assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 6 ft |
|---|---|---|
| 100 MHz | 5.3 dB | 0.32 dB |
| 450 MHz | 12 dB | 0.72 dB |
| 900 MHz | 17.5 dB | 1.05 dB |
| 1.8 GHz | 26 dB | 1.56 dB |
| 2.4 GHz | 30.5 dB | 1.83 dB |
| 5.8 GHz | 52 dB | 3.12 dB |
About This Assembly
RG316DS Cable
RG-316DS is a double-shielded version of RG-316, featuring two braid layers over the PTFE dielectric for superior EMI isolation. This construction reduces signal leakage and interference pickup, making it essential in sensitive receiver chains, spectrum analyzers, and high-density RF wiring where crosstalk must be minimized.
MCX Connector
MCX (Micro Coaxial) is a snap-on RF connector approximately 30% smaller than SMB, designed for compact equipment requiring frequent connections in a small footprint. Rated to 6 GHz, MCX is commonly used in GPS receivers, automotive telematics modules, handheld communication devices, and compact measurement instruments.
Common Applications
This MCX cable assembly is well suited for sensitive receiver chains, spectrum analyzer inputs, and high-EMI environments. The combination of reliable MCX connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 6 ft?
Yes. This page is for the 6 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 6 ft cable?
At 1800 MHz, RG316DS loses approximately 26 dB per 100 ft. This 6 ft assembly will have roughly 1.56 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 6 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both MCX MALE and MCX MALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
