Cable
RG405
End A
RP-SMA FEMALE
End B
RP-SMA MALE
Specs Summary
25 ft RG405 — RP-SMA FEMALE to RP-SMA MALE
RG405 cable assembly, 25 feet, with RP-SMA FEMALE and RP-SMA MALE connectors. Hand-assembled, tested, and ships free within the US.
25 ft — RP-SMA FEMALE / RP-SMA MALE
$57.48
Free shipping • In stock
Other lengths:
Signal Loss — 25 ft
Approximate insertion loss for this 25 ft RG405 assembly at common RF frequencies.
| Frequency | Loss / 100 ft | Loss — 25 ft |
|---|---|---|
| 100 MHz | 5.5 dB | 1.38 dB |
| 450 MHz | 12 dB | 3 dB |
| 900 MHz | 17.5 dB | 4.38 dB |
| 1.8 GHz | 25.5 dB | 6.38 dB |
| 2.4 GHz | 30 dB | 7.5 dB |
| 5.8 GHz | 49 dB | 12.25 dB |
About This Assembly
RG405 Cable
RG-405 (UT-085) is a 0.086" semi-rigid coaxial cable — smaller than RG-402 — with a solid copper outer conductor delivering superior shielding and phase stability. Commonly used in microwave integrated circuit (MMIC) assemblies, millimeter-wave test setups, and anywhere an extremely compact rigid interconnect is required up to 65 GHz.
RP-SMA Connector
RP-SMA (Reverse Polarity SMA) uses the SMA threaded coupling mechanism but with the male/female pin convention reversed — the jack has a pin and the plug has a socket. Originally standardized to prevent connection of uncertified antennas to consumer WiFi equipment, RP-SMA is now the dominant connector on commercial WiFi routers, access points, and 2.4/5 GHz antennas.
Common Applications
This RP-SMA cable assembly is well suited for compact microwave and millimeter-wave assemblies and MMIC interconnects. The combination of reliable RP-SMA connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
Frequently Asked Questions
Is this cable hand-assembled in the USA?
Yes. Every CoaxRF cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables from overseas — each cable is built to order.
Can I order a different length than 25 ft?
Yes. This page is for the 25 ft assembly. Use the length buttons above to select a different standard length, or use the Cable Builder for any custom length.
How much signal loss will I see with this 25 ft cable?
At 1800 MHz, RG405 loses approximately 25.5 dB per 100 ft. This 25 ft assembly will have roughly 6.38 dB of insertion loss at that frequency. See the signal loss table for all frequency points.
What is the maximum frequency for this assembly?
This assembly is rated DC – 18 GHz. The effective frequency limit is set by the lowest-rated component — either the cable or one of the connectors. Both RP-SMA FEMALE and RP-SMA MALE connectors must be within spec at your target frequency.
What is your return policy?
We accept returns within 30 days of delivery. Custom-length cables are accepted as long as they are in original condition. Contact us and we will provide a prepaid return label at no charge.
