Cable
LMR195 Times
End A
PL259 UHF Male
$3.00
End B
PL259 UHF Male
$3.00
LMR195 Times — PL259 UHF Male to PL259 UHF Male
Custom LMR195 Times cable assembly with PL259 UHF Male and PL259 UHF Male connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $21.98 | |
| 6 ft | $29.38 | |
| 25 ft | $57.50 | |
| 50 ft | $94.50 | |
| 100 ft | $168.50 | |
| 250 ft | $390.50 |
Specs Summary
About This Assembly
LMR195 Times Cable
LMR-195 is a Times Microwave 50-ohm flexible coaxial cable with a 0.195" outer diameter and very low loss compared to RG-58. Its aluminized tape plus tinned copper braid shield provides excellent 40 dB shielding, making it suitable for runs from 10 to 50 feet in WiFi, cellular, and two-way radio installations.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This UHF cable assembly is well suited for WiFi antenna pigtails, cellular signal boosters, and two-way radio connections. The combination of reliable UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
LMR195 Times Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 3.3 dB | 0.033 dB |
| 450 MHz | 7.1 dB | 0.071 dB |
| 900 MHz | 10.2 dB | 0.102 dB |
| 1.8 GHz | 14.9 dB | 0.149 dB |
| 2.4 GHz | 17.3 dB | 0.173 dB |
| 5.8 GHz | 28.9 dB | 0.289 dB |
Frequently Asked Questions
What is LMR195 Times coaxial cable used for?
LMR-195 is a Times Microwave 50-ohm flexible coaxial cable with a 0.195" outer diameter and very low loss compared to RG-58. Its aluminized tape plus tinned copper braid shield provides excellent 40 dB shielding, making it suitable for runs from 10 to 50 feet in WiFi, cellular, and two-way radio installations.
What is the signal loss of LMR195 Times?
At 1800 MHz, LMR195 Times has approximately 14.9 dB of loss per 100 ft (0.149 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
