Cable
LMR195 Times
End A
RP-TNC MALE
$1.00
End B
RP-TNC MALE
$1.00
LMR195 Times — RP-TNC MALE to RP-TNC MALE
Custom LMR195 Times cable assembly with RP-TNC MALE and RP-TNC MALE connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $17.98 | |
| 6 ft | $25.38 | |
| 25 ft | $53.50 | |
| 50 ft | $90.50 | |
| 100 ft | $164.50 | |
| 250 ft | $386.50 |
Specs Summary
About This Assembly
LMR195 Times Cable
LMR-195 is a Times Microwave 50-ohm flexible coaxial cable with a 0.195" outer diameter and very low loss compared to RG-58. Its aluminized tape plus tinned copper braid shield provides excellent 40 dB shielding, making it suitable for runs from 10 to 50 feet in WiFi, cellular, and two-way radio installations.
RP-TNC Connector
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
Common Applications
This RP-TNC cable assembly is well suited for WiFi antenna pigtails, cellular signal boosters, and two-way radio connections. The combination of reliable RP-TNC connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
LMR195 Times Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 3.3 dB | 0.033 dB |
| 450 MHz | 7.1 dB | 0.071 dB |
| 900 MHz | 10.2 dB | 0.102 dB |
| 1.8 GHz | 14.9 dB | 0.149 dB |
| 2.4 GHz | 17.3 dB | 0.173 dB |
| 5.8 GHz | 28.9 dB | 0.289 dB |
Frequently Asked Questions
What is LMR195 Times coaxial cable used for?
LMR-195 is a Times Microwave 50-ohm flexible coaxial cable with a 0.195" outer diameter and very low loss compared to RG-58. Its aluminized tape plus tinned copper braid shield provides excellent 40 dB shielding, making it suitable for runs from 10 to 50 feet in WiFi, cellular, and two-way radio installations.
What is the signal loss of LMR195 Times?
At 1800 MHz, LMR195 Times has approximately 14.9 dB of loss per 100 ft (0.149 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 6 GHz, limited by the lowest-rated component across the cable and connectors.
