Cable
RG316DS
End A
RP-TNC MALE
$1.00
End B
SO239 UHF Female
$3.00
RG316DS — RP-TNC MALE to SO239 UHF Female
Custom RG316DS cable assembly with RP-TNC MALE and SO239 UHF Female connectors. Every cable is hand-assembled, tested, and ships free.
| Length | Price | |
|---|---|---|
| 1 ft | $17.98 | |
| 6 ft | $23.23 | |
| 25 ft | $43.18 | |
| 50 ft | $69.43 | |
| 100 ft | $121.93 |
Specs Summary
About This Assembly
RG316DS Cable
RG-316DS is a double-shielded version of RG-316, featuring two braid layers over the PTFE dielectric for superior EMI isolation. This construction reduces signal leakage and interference pickup, making it essential in sensitive receiver chains, spectrum analyzers, and high-density RF wiring where crosstalk must be minimized.
RP-TNC Connector
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This RP-TNC and UHF cable assembly is well suited for sensitive receiver chains, spectrum analyzer inputs, and high-EMI environments. The combination of reliable RP-TNC and UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RG316DS Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 5.3 dB | 0.053 dB |
| 450 MHz | 12 dB | 0.12 dB |
| 900 MHz | 17.5 dB | 0.175 dB |
| 1.8 GHz | 26 dB | 0.26 dB |
| 2.4 GHz | 30.5 dB | 0.305 dB |
| 5.8 GHz | 52 dB | 0.52 dB |
Frequently Asked Questions
What is RG316DS coaxial cable used for?
RG-316DS is a double-shielded version of RG-316, featuring two braid layers over the PTFE dielectric for superior EMI isolation. This construction reduces signal leakage and interference pickup, making it essential in sensitive receiver chains, spectrum analyzers, and high-density RF wiring where crosstalk must be minimized.
What is the signal loss of RG316DS?
At 1800 MHz, RG316DS has approximately 26 dB of loss per 100 ft (0.26 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
What is a RP-TNC connector?
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
